Ten-fold dilutions in practice
This short guide explains what the 10-fold dilution calculator does, how to get the best result and when another tool is a better fit.
Why ten-fold
A ten-fold series moves one order of magnitude per tube, so six tubes cover a million-fold range. That makes it the standard way to bring dense bacterial cultures, virus stocks or concentrated samples down to a countable or measurable level. Because each tube is exactly one log lower, results are easy to read: tube 4 is 10⁻⁴ of the stock.
Log-spaced dilutions suit samples whose concentration is unknown.
Volumes
For a ten-fold step, mix 1 part of the previous tube with 9 parts diluent. With 1 mL per tube that’s 100 µL plus 900 µL; with 10 mL tubes it’s 1 mL plus 9 mL. The calculator works this out for any tube volume and shows how much diluent you need for the whole series, so you can prepare enough buffer or saline in one go.
Pre-fill all tubes with diluent before you start transferring.
A worked example
A stock contains 1,000 µg/mL and you need 0.001 µg/mL. That’s a million-fold dilution, or six ten-fold steps. With 1 mL per tube, put 900 µL diluent in six tubes and transfer 100 µL along the row. Tube 3 holds 1 µg/mL and tube 6 holds 0.001 µg/mL. The diluent total is 5.4 mL.
Change tips at every step to avoid carry-over.
Accuracy tips
Errors multiply along a series, so pipette carefully and mix each tube by vortexing or pipetting up and down before the next transfer. Use calibrated pipettes and avoid transferring volumes below about 10 µL. For plate counts, plate two or three consecutive dilutions so at least one gives 30–300 colonies.
Check results against your lab’s procedures and product data sheets.
Related tools
For larger steps, use the 100-Fold Dilution Calculator. For a custom series, use the Serial Dilution Calculator.
- Each step: 1 part + 9 parts
- n steps = 10⁻ⁿ of the stock
- Change tips between tubes
Further reading: Serial dilution explained. It explains the format behind this 10-fold dilution calculator in more detail.
