Doubling dilutions
This short guide explains what the 2-fold dilution calculator does, how to get the best result and when another tool is a better fit.
Why two-fold
Two-fold or doubling dilutions halve the concentration in each tube. They give fine, even steps and are the standard for minimum inhibitory concentration (MIC) testing, antibody titres and many standard curves. Results are often reported as the last dilution that still shows an effect, such as a titre of 1 : 256.
Each two-fold step is about 0.3 log units.
Volumes
Each step is 1 part sample plus 1 part diluent, so the volumes are equal. With 1 mL per tube, transfer 500 µL into 500 µL. In a 96-well plate with 100 µL per well, add 100 µL diluent to each well and transfer 100 µL along the row, discarding 100 µL from the last well. The calculator shows these volumes for any size.
A multichannel pipette speeds up plate work.
A worked example
An antibiotic stock is 64 µg/mL and an MIC panel needs eight doubling dilutions. The series gives 32, 16, 8, 4, 2, 1, 0.5 and 0.25 µg/mL, a total dilution of 1 : 256. If bacteria grow at 1 µg/mL but not at 2 µg/mL, the MIC is 2 µg/mL. With 100 µg/mL as the stock, eight tubes end at 0.39 µg/mL.
Include growth and sterility controls.
Good practice
Errors accumulate over long series, so pipette carefully and mix well before each transfer. Prepare the stock at twice the top concentration when the inoculum will dilute each well by half, as in broth microdilution. Follow the standard your lab uses, such as CLSI or EUCAST.
Check results against your lab’s procedures and product data sheets.
Related tools
For wider steps, use the 5-Fold Dilution Calculator. For MIC set-ups, use the MIC Dilution Calculator.
- Each step: equal volumes
- 8 steps = 1 : 256
- Titre = last positive dilution
Further reading: Serial dilution explained. It explains the format behind this 2-fold dilution calculator in more detail.
