FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova ยท Lab calculators

PPM Dilution Calculator Online

Work out how much of a ppm stock solution to dilute to make a lower-ppm standard. Shows stock and diluent volumes, dilution factor and the result in ppb and mg/L.

PPM Dilution Calculator

Free ppm dilution calculator that runs in your browser. Nothing is uploaded.

Cโ‚Vโ‚ = Cโ‚‚Vโ‚‚

For dilutions over 1,000ร—, the calculator suggests a two-step dilution for better accuracy.

How to make a ppm dilution

1Enter the stock ppm

For example a 1,000 ppm standard.

2Enter the target ppm and volume

Such as 5 ppm in 100 mL.

3Pipette and make up

Pipette the stock into a volumetric flask and fill to the mark.

Calibration standards from a 1,000 ppm stock

Vโ‚ = Cโ‚‚ ร— Vf รท Cโ‚. In dilute water solutions 1 ppm โ‰ˆ 1 mg/L.

Volumes for 100 mL flasks.

TargetStock neededDilution factor
1 ppm0.1 mL1,000ร—
2 ppm0.2 mL500ร—
5 ppm0.5 mL200ร—
10 ppm1.0 mL100ร—
50 ppm5.0 mL20ร—

Working with parts per million

This short guide explains what the ppm dilution calculator does, how to get the best result and when another tool is a better fit.

What ppm means

Parts per million is a way to express very small concentrations: one part of substance per million parts of solution. In water-based solutions, 1 ppm is very close to 1 mg per litre, because a litre of water weighs about a kilogram. Labs use ppm for metals, nutrients, chlorine and other trace substances. 1% is 10,000 ppm, and 1 ppm is 1,000 ppb (parts per billion).

PPM Dilution Calculator โ€“ ppm to ppm
How the ppm dilution calculator works: ppm in, ppm out.

In air or solids, ppm may be by volume or by mass, so check the context.

Diluting stock standards

Certified stock standards, often 1,000 ppm, are diluted to make working standards for calibration curves. The Cโ‚Vโ‚ = Cโ‚‚Vโ‚‚ rule gives the stock volume: multiply the target concentration by the final volume and divide by the stock concentration. Pipette that volume into a volumetric flask, add diluent to the mark and mix by inverting. Use the same acid or matrix as your samples where required.

Use a calibrated pipette suited to the volume.

A worked example

An analyst needs 5, 10 and 50 ppm iron standards in 100 mL flasks from a 1,000 ppm stock. The calculator gives 0.5 mL, 1.0 mL and 5.0 mL of stock, each made up to 100 mL. For a 2 ppm standard from a 10,000 ppm stock, the stock volume would be just 0.02 mL, a 5,000ร— dilution, so the calculator suggests an intermediate dilution, for example to about 141 ppm first.

Prepare standards fresh unless your method allows storage.

Accuracy matters

Tiny volumes are the main source of error in ppm work. Keep pipetted volumes above about 0.1 mL where possible, use two-step dilutions for very large factors and work from the most concentrated standard down to avoid contamination. Record the stock lot, expiry and your calculations.

Check results against your labโ€™s procedures and product data sheets.

Related tools

To add a known spike to samples, use the Standard Addition Calculator. To convert percent to ppm, use the Percent Concentration Calculator.

  • 1 ppm โ‰ˆ 1 mg/L in water
  • 1% = 10,000 ppm
  • Use two steps for dilutions over 1,000ร—

Further reading: Parts-per notation explained. It explains the format behind this ppm dilution calculator in more detail.

Where itโ€™s used

Calibration curves

AAS, ICP and UV-Vis.

Water testing

Trace metals and nutrients.

Hydroponics

Nutrient strengths.

Teaching

Dilution practice.

Quick fixes

โ€œThe target must be lowerโ€ฆโ€

You can only dilute down from the stock.

Volume too small to pipette

Use a two-step dilution.

ppm vs mg/L confusion

Theyโ€™re equal in dilute water solutions.

Need ppb

Multiply ppm by 1,000; the result shows it.

Frequently asked questions

How do I dilute a ppm solution?

Use Vโ‚ = Cโ‚‚ ร— V_f รท Cโ‚, then make up to volume.

How do I make 5 ppm from 1,000 ppm?

0.5 mL stock made up to 100 mL.

Is 1 ppm the same as 1 mg/L?

In dilute water solutions, yes.

How many ppm is 1%?

10,000 ppm.

How many ppb in 1 ppm?

1,000 ppb.

What is a dilution factor?

Stock ppm รท target ppm.

When should I use two steps?

For dilutions over about 1,000ร—.

Can I use ยตL?

Yes.

Is my data saved?

No.

Can it concentrate a solution?

No, it only dilutes.