Hundred-fold dilutions
This short guide explains what the 100-fold dilution calculator does, how to get the best result and when another tool is a better fit.
When to use 100-fold steps
A hundred-fold step drops the concentration by two orders of magnitude, so fewer tubes are needed to cover a very wide range. Four 100-fold steps reach 10⁻⁸, which would take eight ten-fold tubes. That saves time, diluent and plastic when you start with something very concentrated, such as an overnight culture with around 10⁹ cells per mL.
Fewer tubes also means fewer chances for pipetting error to build up.
Volumes and accuracy
Each step is 1 part sample plus 99 parts diluent. With 1 mL per tube you transfer just 10 µL, so pipette accuracy matters. Many labs prefer 100 µL into 9.9 mL for better precision. The calculator shows the transfer and diluent volumes for any tube size, and the total diluent you need.
Use a 10 µL or 20 µL pipette for small transfers, not a 200 µL one.
A worked example
An overnight culture holds about 10⁹ CFU/mL and you want about 100 colonies on a plate from 100 µL. That needs roughly 1,000 CFU/mL, or a 10⁻⁶ dilution: three 100-fold steps. With 10 mL tubes, add 0.1 mL to 9.9 mL three times. Plating 100 µL from tube 3 should give around 100 colonies.
Plate the tube on either side as a check.
Combining factors
If 100-fold jumps are too coarse, mix factors: two 100-fold steps then two 10-fold steps give 10⁻⁶ with finer control at the end. Use the factor box to switch any series to 10-fold, or use the Serial Dilution Calculator for mixed series.
Check results against your lab’s procedures and product data sheets.
Related tools
For finer steps, use the 10-Fold Dilution Calculator. To count colonies, use the CFU Calculator.
- Each step: 1 part + 99 parts
- 4 steps = 10⁻⁸
- Prefer 100 µL into 9.9 mL
Further reading: Serial dilution explained. It explains the format behind this 100-fold dilution calculator in more detail.
