FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova · Lab calculators

5-Fold Dilution Calculator Online

Build a five-fold series for standard curves and titrations. Set the top concentration and the number of points, then read the transfer and buffer volume and every point’s value.

5-Fold Dilution Calculator

Free 5-fold dilution calculator that runs in your browser. Nothing is uploaded.

1 part + 4 parts

Each point is 20% of the one above it, roughly 0.7 log units apart.

How to do a 5-fold serial dilution

1Set the top standard

The highest point on your curve.

2Decide how many points

Six or seven suits most assays.

3Transfer one fifth each time

For example 200 µL into 800 µL.

A 5-fold series from 100 µg/mL

Each tube is one fifth of the one before: 200 µL into 800 µL.

Six tubes, 1 mL in each.

TubeDilutionConcentrationTransfer + diluent
11 : 520 µg/mL200 µL + 800 µL
21 : 254 µg/mL200 µL + 800 µL
41 : 6250.16 µg/mL200 µL + 800 µL
61 : 15,6250.0064 µg/mL200 µL + 800 µL

Five-fold dilution series

This short guide explains what the 5-fold dilution calculator does, how to get the best result and when another tool is a better fit.

Why five-fold

Five-fold steps sit between two-fold and ten-fold: each tube is 20% of the one before, so six tubes span more than four orders of magnitude while keeping enough points on the curve. That makes them popular for ELISA standard curves, antibody titrations and dose–response experiments, where ten-fold jumps would miss the interesting middle of the curve.

5-Fold Dilution Calculator – 1× to 1/5
How the 5-fold dilution calculator works: 1× in, 1/5 out.

Five-fold steps are evenly spaced on a log scale, about 0.7 log units apart.

Volumes

Each step is 1 part sample plus 4 parts diluent. With 1 mL per tube, transfer 200 µL into 800 µL. With 250 µL per well, transfer 50 µL into 200 µL. The calculator handles any tube volume and lists the concentration and percentage of stock in every tube.

Pre-fill all tubes or wells with diluent first.

A worked example

A protein standard is 100 µg/mL and an assay needs six points. A five-fold series gives 20, 4, 0.8, 0.16, 0.032 and 0.0064 µg/mL. The overall dilution after six steps is 1 : 15,625. The calculator shows that 4.8 mL of diluent covers six 1 mL tubes.

Run standards in duplicate or triplicate.

Good practice

Mix thoroughly at each step, as protein solutions can be viscous. Change tips between transfers, and use the same diluent as your samples so the matrix matches. For a tighter curve, use a two- or three-fold series instead.

Check results against your lab’s procedures and product data sheets.

Related tools

For finer spacing, use the 2-Fold Dilution Calculator. For log steps, use the 10-Fold Dilution Calculator.

  • Each step: 1 part + 4 parts
  • 200 µL into 800 µL
  • 6 steps = 1 : 15,625

Further reading: Serial dilution explained. It explains the format behind this 5-fold dilution calculator in more detail.

Where it helps

ELISA

Standard and sample curves.

Dose–response

Wide but even spacing.

Antibody titration

Finding working dilutions.

Toxicology

Range finding.

Quick fixes

“…must be a whole number”

Enter whole steps.

Curve too steep

Use a 2- or 3-fold series.

Uneven results

Mix each tube and change tips.

Need well volumes

Enter the well volume in µL.

Frequently asked questions

What is a 5-fold dilution?

One fifth sample, four fifths buffer.

How much for 1 mL?

200 µL sample + 800 µL diluent.

What is the dilution after 4 steps?

1 : 625.

Is 1:5 the same as 5-fold?

Yes.

Why use 5-fold for ELISA?

Good range with enough points.

What percent is each tube?

20% of the previous one.

Can I use plates?

Yes, enter the well volume.

Can I change the factor?

Yes.

Is my data saved?

No.

Is it free?

Yes.