FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova · Lab calculators

Bacterial Dilution Calculator Online

Plan a serial dilution of a bacterial culture. See the transfer and diluent volume for each tube, the concentration at every step, and calculate CFU/mL from a colony count.

Bacterial Dilution Calculator

Free bacterial dilution calculator that runs in your browser. Nothing is uploaded.

Serial dilution + CFU

Countable plates usually have 30–300 colonies. The colony count box is optional.

How to plan a serial dilution

1Enter the starting concentration

An estimate in cells or CFU per mL, such as 1 × 10⁸.

2Set the dilution and tubes

Usually 10-fold per step, 6 to 8 tubes, 10 mL each.

3Add your colony count

Optional: colonies, volume plated and which tube it came from, to get CFU/mL.

A 10-fold dilution series

Each tube gets 1 part from the previous tube and 9 parts diluent. Total dilution multiplies: 10 × 10 × 10…

Values for a culture of 1 × 10⁸ CFU/mL plated at 0.1 mL.

TubeTotal dilutionCFU/mLExpected colonies
310⁻³1 × 10⁵10,000 (too many)
410⁻⁴1 × 10⁴1,000 (too many)
510⁻⁵1 × 10³100 (countable)
610⁻⁶1 × 10²10 (too few)

Counting bacteria with serial dilutions

This short guide explains what the bacterial dilution calculator does, how to get the best result and when another tool is a better fit.

Why dilute in steps

A bacterial culture can contain hundreds of millions of cells per millilitre, far too many to count on a plate. Diluting in a single step would need impossibly small volumes, so microbiologists dilute in a series of smaller steps, usually 10-fold. After six 1-in-10 steps the sample is diluted a million times. Plating several tubes means at least one plate lands in the countable range.

Bacterial Dilution Calculator – 10⁸ to 10²
How the bacterial dilution calculator works: 10⁸ in, 10² out.

Use fresh sterile pipette tips for every transfer.

Calculating CFU/mL

Each colony grows from one viable cell or clump, called a colony-forming unit (CFU). Original concentration = colonies ÷ (volume plated × dilution). The dilution here is the total for that tube, written as a fraction such as 10⁻⁵. Only plates with roughly 30 to 300 colonies give reliable counts; fewer are statistically noisy and more overlap.

The calculator warns you if your count is outside 30–300.

A worked example

A student dilutes an overnight culture in six 1:10 steps, using 1 mL into 9 mL each time, and spreads 0.1 mL from tubes 4, 5 and 6. The tube 5 plate has 150 colonies. CFU/mL = 150 ÷ (0.1 × 10⁻⁵) = 1.5 × 10⁸ CFU/mL in the original culture. The tube 4 plate was too crowded to count and tube 6 had only 14 colonies, as expected.

Record the count from the plate in the 30–300 range.

Good technique

Mix each tube thoroughly by vortexing or pipetting before taking the next transfer, because bacteria settle. Work aseptically, label every tube before you start and plate in duplicate or triplicate to average out error. For other dilution factors, such as 1:2 or 1:100, just change the dilution factor.

Check results against your lab’s procedures and product data sheets.

Related tools

To estimate cells from absorbance, use the OD600 Calculator. To predict growth over time, use the Bacterial Growth Calculator.

  • CFU/mL = colonies ÷ (volume × dilution)
  • Count plates with 30–300 colonies
  • Mix well before every transfer

Further reading: Serial dilution explained. It explains the format behind this bacterial dilution calculator in more detail.

Where it’s used

Plate counts

Viable cell numbers.

Food testing

Microbial load.

Water testing

Bacterial counts.

Teaching labs

Serial dilution practice.

Quick fixes

“…tube number can’t be higher…”

The plate tube must be within the dilution series.

Count outside 30–300

Use a plate from a neighbouring tube for a reliable count.

Every plate overgrown

Add more tubes or start from a lower concentration.

Odd transfer volume

Check the tube volume and dilution factor.

Frequently asked questions

How do I calculate CFU/mL?

Colonies ÷ (volume plated × dilution).

What is a 10-fold dilution?

1 part sample plus 9 parts diluent.

How many tubes do I need?

Enough to bring the count into the 30–300 range.

What is a countable plate?

Usually 30 to 300 colonies.

What volume should I plate?

Often 0.1 mL for spread plates or 1 mL for pour plates.

Can I use 1:100 steps?

Yes, enter 100 as the dilution factor.

Why mix between transfers?

Bacteria settle, which skews counts.

Is the starting concentration exact?

No, it’s an estimate to plan the series.

Is my data saved?

No.

What does CFU mean?

Colony-forming unit.