FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova · Lab calculators

100-Fold Dilution Calculator Online

Drop two orders of magnitude per tube. This hundred-fold planner gives the tiny transfer and large diluent volume for each tube, and shows how fast the concentration falls.

100-Fold Dilution Calculator

Free 100-fold dilution calculator that runs in your browser. Nothing is uploaded.

1 part + 99 parts

Two logs per tube, so four tubes already reach 10⁻⁸.

How to do a 100-fold serial dilution

1Start from a dense stock

Such as an overnight culture.

2Pick the number of jumps

Each one divides by 100.

3Use larger tubes for accuracy

0.1 mL into 9.9 mL beats 10 µL into 990 µL.

A 100-fold series from 10⁹ CFU/mL

Each tube is one hundredth of the one before: 10 µL into 990 µL, or 0.1 mL into 9.9 mL.

Four tubes, 1 mL in each.

TubeDilutionConcentrationTransfer + diluent
11 : 100 (10⁻²)10⁷ CFU/mL10 µL + 990 µL
21 : 10⁴ (10⁻⁴)10⁵ CFU/mL10 µL + 990 µL
31 : 10⁶ (10⁻⁶)1,000 CFU/mL10 µL + 990 µL
41 : 10⁸ (10⁻⁸)10 CFU/mL10 µL + 990 µL

Hundred-fold dilutions

This short guide explains what the 100-fold dilution calculator does, how to get the best result and when another tool is a better fit.

When to use 100-fold steps

A hundred-fold step drops the concentration by two orders of magnitude, so fewer tubes are needed to cover a very wide range. Four 100-fold steps reach 10⁻⁸, which would take eight ten-fold tubes. That saves time, diluent and plastic when you start with something very concentrated, such as an overnight culture with around 10⁹ cells per mL.

100-Fold Dilution Calculator – 1× to 1/100
How the 100-fold dilution calculator works: 1× in, 1/100 out.

Fewer tubes also means fewer chances for pipetting error to build up.

Volumes and accuracy

Each step is 1 part sample plus 99 parts diluent. With 1 mL per tube you transfer just 10 µL, so pipette accuracy matters. Many labs prefer 100 µL into 9.9 mL for better precision. The calculator shows the transfer and diluent volumes for any tube size, and the total diluent you need.

Use a 10 µL or 20 µL pipette for small transfers, not a 200 µL one.

A worked example

An overnight culture holds about 10⁹ CFU/mL and you want about 100 colonies on a plate from 100 µL. That needs roughly 1,000 CFU/mL, or a 10⁻⁶ dilution: three 100-fold steps. With 10 mL tubes, add 0.1 mL to 9.9 mL three times. Plating 100 µL from tube 3 should give around 100 colonies.

Plate the tube on either side as a check.

Combining factors

If 100-fold jumps are too coarse, mix factors: two 100-fold steps then two 10-fold steps give 10⁻⁶ with finer control at the end. Use the factor box to switch any series to 10-fold, or use the Serial Dilution Calculator for mixed series.

Check results against your lab’s procedures and product data sheets.

Related tools

For finer steps, use the 10-Fold Dilution Calculator. To count colonies, use the CFU Calculator.

  • Each step: 1 part + 99 parts
  • 4 steps = 10⁻⁸
  • Prefer 100 µL into 9.9 mL

Further reading: Serial dilution explained. It explains the format behind this 100-fold dilution calculator in more detail.

Where it helps

Bacterial cultures

Fast high-range dilution.

Phage and virus work

High titres.

Food testing

Contamination counts.

Analytical chemistry

Concentrated samples.

Quick fixes

Transfer only a few µL

Increase the tube volume to 10 mL.

“…must be a whole number”

Enter whole steps.

Too few colonies

Plate a less diluted tube.

Need 10-fold

Change the factor to 10.

Frequently asked questions

What is a 100-fold dilution?

A hundredth of the sample made up with diluent.

How much for 1 mL?

10 µL sample + 990 µL diluent.

How much for 10 mL?

0.1 mL sample + 9.9 mL diluent.

What is the dilution after 3 steps?

10⁻⁶.

Is 1:100 the same as 100-fold?

Yes.

Why use 100-fold steps?

To cover a wide range with fewer tubes.

Is it less accurate?

Small transfers need careful pipetting.

Can I mix 100- and 10-fold steps?

Yes, use the Serial Dilution Calculator.

Is my data saved?

No.

Is it free?

Yes.