FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova · Lab calculators

2-Fold Dilution Calculator Online

Set up doubling dilutions in tubes or plate wells. Give the starting strength and the number of wells, and see the equal volumes to use and the halved concentration in each.

2-Fold Dilution Calculator

Free 2-fold dilution calculator that runs in your browser. Nothing is uploaded.

1 part + 1 parts

Every well holds half the concentration of the previous one.

How to do a 2-fold serial dilution

1Enter the top concentration

For example an antibiotic at 64 µg/mL.

2Enter how many wells

Eight to twelve is common.

3Mix equal volumes

Then carry half along the row.

A 2-fold series from 64 µg/mL

Each well is half the one before: equal volumes of sample and diluent.

Typical MIC range in 200 µL wells.

WellDilutionConcentrationCarry + diluent
11 : 232 µg/mL100 µL + 100 µL
31 : 88 µg/mL100 µL + 100 µL
61 : 641 µg/mL100 µL + 100 µL
81 : 2560.25 µg/mL100 µL + 100 µL

Doubling dilutions

This short guide explains what the 2-fold dilution calculator does, how to get the best result and when another tool is a better fit.

Why two-fold

Two-fold or doubling dilutions halve the concentration in each tube. They give fine, even steps and are the standard for minimum inhibitory concentration (MIC) testing, antibody titres and many standard curves. Results are often reported as the last dilution that still shows an effect, such as a titre of 1 : 256.

2-Fold Dilution Calculator – 1× to 1/2
How the 2-fold dilution calculator works: 1× in, 1/2 out.

Each two-fold step is about 0.3 log units.

Volumes

Each step is 1 part sample plus 1 part diluent, so the volumes are equal. With 1 mL per tube, transfer 500 µL into 500 µL. In a 96-well plate with 100 µL per well, add 100 µL diluent to each well and transfer 100 µL along the row, discarding 100 µL from the last well. The calculator shows these volumes for any size.

A multichannel pipette speeds up plate work.

A worked example

An antibiotic stock is 64 µg/mL and an MIC panel needs eight doubling dilutions. The series gives 32, 16, 8, 4, 2, 1, 0.5 and 0.25 µg/mL, a total dilution of 1 : 256. If bacteria grow at 1 µg/mL but not at 2 µg/mL, the MIC is 2 µg/mL. With 100 µg/mL as the stock, eight tubes end at 0.39 µg/mL.

Include growth and sterility controls.

Good practice

Errors accumulate over long series, so pipette carefully and mix well before each transfer. Prepare the stock at twice the top concentration when the inoculum will dilute each well by half, as in broth microdilution. Follow the standard your lab uses, such as CLSI or EUCAST.

Check results against your lab’s procedures and product data sheets.

Related tools

For wider steps, use the 5-Fold Dilution Calculator. For MIC set-ups, use the MIC Dilution Calculator.

  • Each step: equal volumes
  • 8 steps = 1 : 256
  • Titre = last positive dilution

Further reading: Serial dilution explained. It explains the format behind this 2-fold dilution calculator in more detail.

Where it helps

MIC tests

Antibiotic doubling dilutions.

Serology

Antibody titres.

Standard curves

Fine spacing.

Teaching

Halving series.

Quick fixes

“…must be a whole number”

Enter whole tubes.

Last well too full

Discard the transfer volume from it.

Results skip

Mix well and change tips.

Need wider range

Use 5- or 10-fold.

Frequently asked questions

What is a 2-fold dilution?

Half sample, half diluent.

How much for 1 mL?

500 µL sample + 500 µL diluent.

What is the dilution after 8 steps?

1 : 256.

Is 1:2 the same as 2-fold?

Yes.

What is a doubling dilution?

Another name for a 2-fold series.

Why use it for MIC?

Fine, standard steps.

What is a titre?

The highest dilution still positive.

Can I use plate wells?

Yes, enter the well volume.

Is my data saved?

No.

Is it free?

Yes.