FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova · Lab & chemistry calculators

Solution Dilution Calculator Online

Make a working solution from any stock. Enter the stock concentration, the target concentration and the final volume to get the stock volume and diluent needed.

Solution Dilution Calculator

Free solution dilution calculator that runs in your browser. Nothing is uploaded.

Any matching units
Calculator inputs
—
Stock volume needed—
Nominal difference to final—
Dilution factor—
Final volume—
✓ Free   •   ✓ No signup   •   ✓ Mobile friendly

Use reliable source values and follow the authoritative method, product instructions, or professional workflow that governs your task.

Concentrations can be M, mM, mg/mL, ppm, % or ×, as long as both use the same unit.

How to make a working solution

1Enter the stock concentration

The strength printed on the stock bottle.

2Enter target and final volume

The working strength and how much you need.

3Prepare

Measure the stock volume, then add diluent up to the final volume.

Working solutions from common stocks

The calculation is C1V1 = C2V2 solved for V1. It works with any unit, so 10× buffers and ppm standards are handled the same way.

Diluent volume = final volume − stock volume.

StockTargetFinal volumeStock to use
10× PBS1×1 L100 mL
10 M NaOH1 M250 mL25 mL
1000 ppm standard50 ppm100 mL5 mL
50× TAE1×2 L40 mL

From stock bottle to working solution

This short guide explains what the solution dilution calculator does, how to get the best result and when another tool is a better fit.

What the Solution Dilution Calculator Solves

This calculator is built for simple concentration-volume dilution: a known stock is used to prepare a lower concentration without changing the amount of solute by reaction or removal. If C1, C2, and V2 are known, the required stock volume is V1 = C2V2/C1. The same relationship appears in the dedicated C1V1 Dilution Calculator, which can solve for any one missing variable.

Solution Dilution Calculator – Stock to Working
How the solution dilution calculator works: Stock in, Working out.

Worked Stock-to-Working Example

Suppose a 2.0 M stock is used to prepare 250 mL of a 0.10 M solution. V1 = 0.10 × 250 ÷ 2.0 = 12.5 mL stock. The nominal difference to final volume is 237.5 mL. A precise method may require transferring 12.5 mL stock and bringing the preparation to exactly 250 mL rather than measuring 237.5 mL solvent separately.

Concentration Units Must Be Compatible

C1 and C2 must use the same concentration basis. If the stock is 500 mM and the target is 25 mM, the equation can be used directly because both are in millimolar. If one value is micromolar, convert it first. For small molar scales, the Nanomolar Calculator can help verify nM, µM, mM, and M conversions before dilution arithmetic.

Simple Dilution Can Only Lower Concentration

Adding diluent cannot make the final solution more concentrated than the stock. If C2 is greater than C1, the requested preparation is not a simple dilution. A more concentrated stock, solvent removal, or another preparation strategy would be required. The calculator rejects target values above the stock to make this inconsistency visible.

Final Volume and Volume Additivity

V2 means final solution volume. For many laboratory preparations, the correct procedure is to combine the required stock with part of the diluent, mix, and then bring the solution to its final calibrated volume. Liquids are not always perfectly additive, so V2 − V1 is best treated as a nominal difference unless the method explicitly permits direct volume addition.

Large Dilution Factors

A very large dilution factor can produce a stock transfer that is too small for reliable measurement. Rather than rounding a tiny volume upward, consider an intermediate solution or a repeated series if the method permits. The Serial Dilution Calculator is useful when the overall factor is easier to achieve through several documented steps.

Working Solutions and Stock Records

If the diluted product will be used repeatedly, record the stock identity, concentration, target concentration, stock volume, final volume, diluent, preparation date, and storage conditions required by the method. The Working Solution Calculator focuses on the same arithmetic from the practical perspective of preparing routine working reagents.

Percent and PPM Solutions

The C1V1 relationship can also be used with compatible percentages or ppm values when both sides share the same basis. For clearer interpretation, ToolzNova provides a Percentage Dilution Calculator and a PPM Dilution Calculator. Those pages explain basis-specific pitfalls that a general solution calculator cannot fully cover.

Document the Actual Prepared Quantity

A calculation provides a theoretical plan. If the actual transferred stock or final volume differs from the target, preserve the actual values and recalculate the resulting concentration when necessary. This distinction between planned and measured values is important for traceability and troubleshooting.

Choosing a Useful Final Volume

The final volume should come from the protocol, method, recipe, or practical preparation need. Choosing an arbitrarily large final volume simply to make the stock transfer easier can change storage, stability, reagent use, and downstream workflow. If a calculated stock transfer is impractically small, an intermediate dilution may be preferable because it preserves the intended final volume while moving the transfer into a more reliable measurement range.

Mass Concentration Versus Molar Concentration

C1V1 = C2V2 can work with mass-per-volume concentrations such as mg/mL or with molar concentrations such as mM, but the stock and target must remain on the same basis. Converting between mg/mL and mM requires molecular weight. If that conversion is necessary, use the Molecular Weight Calculator to verify molar mass before translating between mass and amount-of-substance concentration.

Planning Dilution From the End Point Backward

A practical way to review a solution dilution is to start with the required final state and work backward. Confirm the final concentration and final volume first, then calculate how much stock must supply the required amount of solute. After V1 is known, compare it with the available stock volume and the measuring equipment. This backward approach is especially useful when several possible stock strengths exist because it makes the effect of stock concentration obvious: the more concentrated the stock, the smaller the required transfer for the same final solution. Keep each candidate calculation separate so a volume from one stock is not accidentally used with another.

Further reading: The dilution equation explained. It explains the format behind this solution dilution calculator in more detail.

Where it’s used

Buffers

10× and 50× stocks to 1×.

Standards

ppm and mg/L working standards.

Media

Supplements to working strength.

Reagents

Molar stocks to bench strength.

Quick fixes

Target stronger than stock

Choose a stronger stock or a smaller final volume.

Units differ

Convert so stock and target use the same unit.

Strong base or acid stock

For acids, always add the acid slowly to the water, never water to concentrated acid. Add strong base to water slowly too.

Tiny stock volume

Use an intermediate dilution so you can pipette accurately.

Frequently asked questions

What is the formula?

Stock volume = target × final volume ÷ stock.

How do I make 1× from 10×?

Use one tenth of the final volume as stock.

Can I use ppm?

Yes, if both values are ppm.

How much diluent do I add?

Final volume − stock volume.

What if the stock volume is tiny?

Make an intermediate dilution first.

Is my data uploaded?

No. The solution dilution calculator works entirely in your browser, so your file stays on your device.

Which units are supported?

Any, as long as both concentrations match; volumes in mL, µL or L.

How do I make 1 M NaOH from 10 M?

25 mL stock in 250 mL total.

Is this the same as C1V1?

Yes, solved for the stock volume.

Can I make a stronger solution?

No; dilution only makes weaker solutions.