FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova ยท Lab & chemistry calculators

Percent to Molarity Calculator Online

Convert % w/v or % w/w concentration into molarity. For % w/w, add the solution density so the tool can turn mass percent into grams per litre first.

Percent to Molarity Calculator

Free percent to molarity calculator that runs in your browser. Nothing is uploaded.

% w/v ยท % w/w
Calculator inputs
โ€”
Molarityโ€”
g/L soluteโ€”
Percent basisโ€”
Molar massโ€”
โœ“ Free โ€ข โœ“ No signup โ€ข โœ“ Mobile friendly

Use the exact chemical form, concentration basis, reaction factor, and source values required by your method.

% v/v canโ€™t be converted with molar mass alone. For % w/w, the density must be for the solution, not the pure solute.

How to convert percent to molarity

1Pick the percent basis

Choose % w/v (g per 100 mL) or % w/w with density (g per 100 g of solution).

2Enter the numbers

Type the percent, the soluteโ€™s molar mass and, for % w/w, the solution density in g/mL.

3Read molarity

See mol/L plus the g/L figure used in the conversion.

Common reagents as molarity

% w/v becomes g/L by multiplying by 10. % w/w becomes g/L by multiplying the fraction by density ร— 1000. Dividing g/L by molar mass gives molarity.

Densities below are typical label values at about 20 ยฐC; check your bottle.

ReagentPercentDensityMolarity
Saline (NaCl)0.9% w/vโ€”โ‰ˆ 0.154 M
Glucose5% w/vโ€”โ‰ˆ 0.278 M
Hydrochloric acid37% w/w1.19 g/mLโ‰ˆ 12.1 M
Nitric acid70% w/w1.42 g/mLโ‰ˆ 15.8 M
Sulfuric acid98% w/w1.84 g/mLโ‰ˆ 18.4 M

Converting percent concentration step by step

This short guide explains what the percent to molarity calculator does, how to get the best result and when another tool is a better fit.

Why Percent Needs a Defined Basis

A percent concentration can mean weight/volume, weight/weight, volume/volume, or another convention. Molarity is moles per liter, so the route from percent to molarity depends on what the percent actually represents.

Percent to Molarity Calculator โ€“ % to M
How the percent to molarity calculator works: % in, M out.

% w/v to Molarity

For % w/v, x% means x grams per 100 mL final solution. Multiply by 10 to obtain g/L, then divide by molar mass to obtain mol/L. Formula: M = (% w/v ร— 10) รท molar mass.

Worked % w/v Example

A 5% w/v solution of a 100 g/mol compound contains 50 g/L. Dividing by 100 g/mol gives 0.50 M.

% w/w Requires Density

For % w/w, x% means x grams solute per 100 grams solution. To convert to grams per liter, solution density is required. For density d in g/mL, g/L solute = (%/100) ร— d ร— 1000.

Worked % w/w Example

A 10% w/w solution with density 1.20 g/mL contains 120 g solute per liter of solution. If molar mass is 60 g/mol, molarity is 120/60 = 2.0 M.

% v/v Cannot Usually Convert With Molar Mass Alone

Volume percent gives component liquid volume per final volume. Converting it to molarity usually requires density and chemical composition of the component, not only molar mass. This calculator therefore focuses on w/v and w/w modes.

Percent Concentration Tool

The Percent Concentration Calculator can help distinguish w/v, w/w, and v/v definitions before attempting a molarity conversion.

Molar Mass Still Matters

Both supported modes ultimately convert to grams per liter and then divide by g/mol. Use the Molecular Weight Calculator for the exact solute form.

Density Must Match the Solution

For w/w conversion, density should correspond to the actual solution composition and relevant temperature. Water density should not be assumed for concentrated solutions unless the method explicitly permits an approximation.

Check the Reverse Conversion

After calculating M, multiply by molar mass to recover g/L. For w/v, divide g/L by 10 to recover the starting percentage. For w/w, use density to reconstruct the mass fraction.

Further reading: Molar concentration explained. It explains the format behind this percent to molarity calculator in more detail.

Where itโ€™s used

Stock acids

Find the molarity of concentrated acid bottles.

Saline & media

Check physiological solutions.

Lab prep

Plan dilutions from % stock.

Coursework

Check conversion homework.

Quick fixes

โ€œEnter positive solution densityโ€

% w/w mode needs the density of the whole solution in g/mL.

Answer is ten times too big

Check the basis: % w/v and % w/w give very different results for strong stocks.

Using % v/v

Volume percent needs the solute density as well; convert it to % w/v first.

Result is odd for a hydrate

Molar mass must be for the exact form you weigh, including any water of crystallisation.

Frequently asked questions

What is the formula for % w/v?

Molarity = (percent ร— 10) รท molar mass.

What is the formula for % w/w?

Molarity = (percent รท 100 ร— density ร— 1000) รท molar mass.

Why does % w/w need density?

It turns grams per 100 g of solution into grams per litre.

Can it convert % v/v?

Not directly; you also need the soluteโ€™s density.

What is 37% HCl in molarity?

About 12.1 M, using a density of 1.19 g/mL.

What is 0.9% saline in molarity?

About 0.154 M NaCl.

Which density should I use?

The density of the solution at your working temperature.

Is my data uploaded?

No. The percent to molarity calculator works entirely in your browser, so your file stays on your device.

Does temperature matter?

Slightly, because density changes with temperature.

How do I go back to percent?

Multiply molarity by molar mass to get g/L, then divide by 10 for % w/v.