FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova ยท Lab & chemistry calculators

Percentage Dilution Calculator Online

Dilute a percent solution to a lower percent. Enter the starting %, target % and final volume to find how much stock and water to mix.

Percentage Dilution Calculator

Free percentage dilution calculator that runs in your browser. Nothing is uploaded.

V1 = C2 ร— V2 รท C1
Calculator inputs
โ€”
Stock volume neededโ€”
Nominal difference to finalโ€”
Dilution factorโ€”
Final volumeโ€”
โœ“ Free   โ€ข   โœ“ No signup   โ€ข   โœ“ Mobile friendly

Verify the source values, units, and governing method or instructions before using any result.

Both percentages must use the same basis, such as % v/v or % w/v.

How to dilute a percent solution

1Enter starting %

The strength of the solution you have, such as 70%.

2Enter target % and final volume

The strength and amount you want to make.

3Mix

Measure the stock volume shown and add water up to the final volume.

Common percent dilutions

This is C1V1 = C2V2 with concentrations in percent. Water to add = final volume โˆ’ stock volume.

Percent solutions are often mixed by volume, so mixing alcohol and water can shrink slightly; top up to the mark.

HaveWantFinal volumeStock + water
70% isopropyl50%1000 mL714.3 + 285.7 mL
95% ethanol70%100 mL73.7 + 26.3 mL
30% hydrogen peroxide3%500 mL50 + 450 mL
6% bleach0.5%1 L83.3 mL + water to 1 L

Making weaker percent solutions

This short guide explains what the percentage dilution calculator does, how to get the best result and when another tool is a better fit.

Percentage Basis Must Match

A percentage concentration is incomplete without its basis. Common forms include % v/v, % w/v, and % w/w. C1V1 = C2V2 is frequently used for compatible solution dilutions, but starting and target percentages must describe the same concentration basis. A 10% w/v solution is not directly interchangeable with a 10% v/v solution.

Percentage Dilution Calculator โ€“ 70% to 30%
How the percentage dilution calculator works: 70% in, 30% out.

Worked Percentage Dilution Example

To prepare 500 mL of a 2% solution from a compatible 10% stock, V1 = 2 ร— 500 รท 10 = 100 mL stock. The nominal difference to final volume is 400 mL. The result assumes the stock and target percentages describe the same substance and basis and that the preparation method permits a simple dilution.

Percentage and Fraction

A percentage is a fraction per hundred. Five percent equals 0.05 as a decimal fraction. The calculator expects the percentage number itself, such as 5 rather than 0.05. Using a decimal fraction where a percent value is expected creates a hundredfold error.

Percent Versus PPM

On the same ratio basis, 1% equals 10,000 ppm. Therefore 0.01% equals 100 ppm. This conversion can be useful for checking scale, but it does not resolve mass-versus-volume basis differences. The PPM Dilution Calculator should be used only after the concentration basis is understood.

Final Volume Versus Added Solvent

The requested final volume includes the stock contribution. If 100 mL stock is needed for 500 mL final solution, the theoretical difference is 400 mL. A precise preparation may instead require adding stock and then bringing the mixture to a 500 mL final mark, especially where volumes are not exactly additive.

Stock Strength Must Be Higher

A simple solvent dilution can only reduce concentration. If target percentage is greater than the stock percentage, the equation would require more stock than the selected final volume. Use a more concentrated source or a different preparation method instead of treating dilution as concentration.

Product Instructions Can Override Generic Arithmetic

Commercial disinfectants, cleaners, reagents, coatings, and other products may specify a particular mixing method, ratio, water quality, order of addition, temperature, or permitted concentration range. The calculator does not replace those instructions. Use the current label, technical data sheet, SDS, or SOP as the source of preparation requirements.

Rounding and Measurement

Choose a volume precision supported by the measuring equipment. A calculator may return 33.333 mL, but the method and glassware determine whether that level of precision is meaningful. When critical, record the unrounded value, chosen practical volume, and the resulting nominal concentration.

Further reading: The dilution equation explained. It explains the format behind this percentage dilution calculator in more detail.

Where itโ€™s used

Disinfectants

Alcohol and peroxide dilutions.

Cleaning

Bleach to a target strength.

Lab reagents

Percent stocks to working strength.

Teaching

Practise C1V1 with percent.

Quick fixes

Target higher than stock

You canโ€™t increase strength by adding water.

Mixed % w/v with % v/v

Use the same basis for both values.

Volume short after mixing

Alcoholโ€“water mixes contract; top up to the final volume.

Strong peroxide or acids

For acids, always add the acid slowly to the water, never water to concentrated acid. Wear gloves and eye protection with 30% peroxide.

Frequently asked questions

What is the formula?

Stock volume = target % ร— final volume รท starting %.

How much water do I add?

Final volume โˆ’ stock volume.

How do I make 70% alcohol from 95%?

Mix 73.7 mL of 95% and top up to 100 mL.

How do I make 3% peroxide from 30%?

50 mL in 500 mL total.

Do percent bases matter?

Yes, both values need the same basis.

Can I make a stronger solution?

No, only weaker by dilution.

Is my data uploaded?

No. The percentage dilution calculator works entirely in your browser, so your file stays on your device.

Why does alcohol volume shrink?

Alcohol and water molecules pack together when mixed.

Is bleach safe to dilute?

With water only; never mix with ammonia or acids.

What units can I use?

mL, ยตL or L.