FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova · Lab calculators

Solution Mixing Calculator Online

Find how much of a stronger and a weaker solution to combine to reach a target concentration and total volume, using the Pearson square (alligation) method.

Solution Mixing Calculator

Free solution mixing calculator that runs in your browser. Nothing is uploaded.

Pearson square

Set the weaker solution to 0 to dilute with water.

How to mix two solutions to a target

1Enter both strengths

For example 70% and 10%.

2Enter the target and total

For example 40% and 500 mL.

3Measure both volumes

Mix and check if needed.

Mixing for a target

V₁ = V × (target − C₂) ÷ (C₁ − C₂).

Example targets.

StrongWeakTarget, totalStrong + weak
70%10%40%, 500 mL250 + 250 mL
95%0% (water)70%, 1,000 mL736.8 + 263.2 mL
30%5%10%, 1 L200 + 800 mL
12%4%6%, 2 L500 + 1,500 mL

Mixing to a target concentration

This short guide explains what the solution mixing calculator does, how to get the best result and when another tool is a better fit.

The Pearson square

The Pearson square, also called alligation, is a quick way to find how much of two solutions to mix. Write the target in the middle, the strong and weak solutions on the left, and subtract diagonally: target minus weak gives the parts of strong, strong minus target gives the parts of weak. The calculator does the same and scales it to your total volume.

Solution Mixing Calculator – High + low to Target
How the solution mixing calculator works: High + low in, Target out.

It’s used in pharmacy, feed formulation and winemaking.

The rule

The target must lie between the two starting strengths, because mixing can only land between them. If you need something stronger than your strongest solution, you must add pure substance or evaporate instead. The calculator warns you when the target is out of range.

Water is a weak solution with concentration 0.

A worked example

A pharmacy needs 500 mL of 40% from 70% and 10% stocks. Parts of strong = 40 − 10 = 30, parts of weak = 70 − 40 = 30, so equal volumes: 250 mL each. To make 1 L of 70% ethanol from 95% and water: 70 parts of 95% and 25 parts water, giving 736.8 mL of 95% topped up with 263.2 mL water.

For ethanol, top up to volume because mixtures shrink.

Limits

The method assumes concentrations combine linearly by volume. For alcohol, sugar and strong acids, mix by mass using % w/w for best accuracy. Check the result with a hydrometer, refractometer or meter when it matters.

Check results against your lab’s procedures and product data sheets.

Related tools

To find the result of a mix, use the Blend Concentration Calculator. For one stock and water, use the C1V1 Dilution Calculator.

  • V₁ = V(T − C₂) ÷ (C₁ − C₂)
  • Target must be between the two
  • Use 0 for water

Further reading: Alligation method. It explains the format behind this solution mixing calculator in more detail.

Where it helps

Pharmacy

Compounding strengths.

Labs

Using two stocks.

Food and drink

Blending syrups and spirits.

Animal feed

Protein blending.

Quick fixes

“…target must lie between…”

Choose a target between the two strengths.

“…different concentrations”

The two solutions must differ.

Diluting with water

Enter 0 for the weaker solution.

Volume short after mixing

Alcohol mixtures shrink; top up.

Frequently asked questions

How do I mix two solutions to a target?

Use the Pearson square.

What is the formula?

V₁ = V × (target − C₂) ÷ (C₁ − C₂).

How much 70% and 10% for 500 mL of 40%?

250 mL of each.

How do I make 70% from 95%?

736.8 mL of 95% + 263.2 mL water per litre.

Can the target be outside the range?

No.

Can I use water?

Yes, as 0%.

What is alligation?

Another name for this method.

Does it work for ppm?

Yes, any unit.

Is my data saved?

No.

Is it free?

Yes.