Blending solutions of different strengths
This short guide explains what the blend concentration calculator does, how to get the best result and when another tool is a better fit.
What a blend calculation does
When you combine solutions, the total amount of dissolved substance is the sum of each part’s concentration times volume. Dividing that by the total volume gives the blend concentration. It’s a weighted average, so a large volume of a weak solution pulls the result down more than a small volume of a strong one.
The same rule covers adding plain water, which has a concentration of 0.
Using consistent units
All concentrations must use the same unit and all volumes the same unit; the calculator labels results with whatever you type. It works for percent, mg/mL, mol/L, ppm or even proof, as long as the values scale with volume. For mass-based mixing, enter masses instead of volumes with % w/w.
Don’t mix % w/v and % w/w in one blend.
A worked example
A lab combines 200 mL of 40% solution with 300 mL of 10%. Total solute is 40 × 200 + 10 × 300 = 11,000; divided by 500 mL, the blend is 22%. Adding 500 mL of 5% gives 13.5%. Mixing 1 L each of 95% and 70% ethanol gives about 82.5% by volume, though real alcohol–water mixtures shrink slightly.
Measure the final volume for alcohol and strong acids.
Limits
Volumes are assumed to add up. That is close for dilute water solutions but not exact for alcohol and water, concentrated acids, or sugar syrups. For precise work, mix by mass and use % w/w. To find how much of each solution to use for a target, use the Solution Mixing Calculator.
Check results against your lab’s procedures and product data sheets.
Related tools
To hit a target strength, use the Solution Mixing Calculator. For a single dilution, use the C1V1 Dilution Calculator.
- C = Σ(CV) ÷ ΣV
- Water counts as 0
- Keep units consistent
Further reading: Weighted averages. It explains the format behind this blend concentration calculator in more detail.
