Using degreaser at the right strength
This short guide explains what the degreaser dilution calculator does, how to get the best result and when another tool is a better fit.
Why dilute properly
Industrial and automotive degreasers are sold as concentrates because a little goes a long way. Using them too strong wastes product and can stain aluminium, dull paint, dry out rubber and leave residue that attracts dirt. Too weak, and grease stays put, so you scrub harder. Measuring to the label ratio gives reliable cleaning and predictable costs.
Alkaline degreasers can damage aluminium and painted surfaces at strong ratios.
Reading the label
Most labels give ratios as 1 part product to x parts water, so 1:10 is 11 parts in total, or about 9% product. Some show a range, such as 1:4 for heavy duty and 1:20 for light duty. If the label says 1 part in x parts total, switch the method in the calculator. Enter the concentrateโs active content, if listed, to see the in-use strength.
Start weaker and strengthen only if needed.
A worked example
A mechanic fills a 1 L sprayer at 1:10 for an engine bay: 90.9 mL degreaser and 909 mL water. For a 10 L floor bucket at 1:20, itโs 476 mL plus 9.52 L. A 5-gallon tank at 1:5 needs 0.83 gallon of concentrate. The table shows other ratios for the same amount.
Let the degreaser dwell for the time on the label, then rinse.
Safety
Wear gloves and eye protection, especially with strong alkaline or solvent-based degreasers. Work in good ventilation, keep products off hot engines unless the label allows it, and never mix with acids or bleach. Store diluted mixes in labelled bottles.
Rinse sensitive surfaces quickly.
Related tools
For other cleaners, use the Cleaning Chemical Dilution or Detergent Dilution Calculator.
- 1:x = 1 part + x parts water
- Heavy 1:4, light 1:20 or weaker
- Product into water, not the reverse
Further reading: About degreasing. It explains the format behind this degreaser dilution calculator in more detail.
