FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova · Lab calculators

Blend Concentration Calculator Online

Find the concentration of a blend made from two or three solutions of different strengths. Enter each concentration and volume to get the weighted average.

Blend Concentration Calculator

Free blend concentration calculator that runs in your browser. Nothing is uploaded.

Weighted average

C = Σ(C × V) ÷ ΣV. Works for %, mg/mL, ppm or any consistent unit.

How to calculate a blend concentration

1Enter each solution

Its concentration and volume.

2Add a third if needed

Leave both boxes blank otherwise.

3Read the blended value

Plus each part’s share.

Example blends

The blend is a volume-weighted average of the parts.

Same units throughout.

BlendVolumesResult
40% + 10%200 mL + 300 mL22%
40% + 10% + 5%200 + 300 + 500 mL13.5%
95% + 70% ethanol1 L + 1 L82.5%
50 ppm + 0 ppm1 L + 4 L10 ppm

Blending solutions of different strengths

This short guide explains what the blend concentration calculator does, how to get the best result and when another tool is a better fit.

What a blend calculation does

When you combine solutions, the total amount of dissolved substance is the sum of each part’s concentration times volume. Dividing that by the total volume gives the blend concentration. It’s a weighted average, so a large volume of a weak solution pulls the result down more than a small volume of a strong one.

Blend Concentration Calculator – C₁ + C₂ to C
How the blend concentration calculator works: C₁ + C₂ in, C out.

The same rule covers adding plain water, which has a concentration of 0.

Using consistent units

All concentrations must use the same unit and all volumes the same unit; the calculator labels results with whatever you type. It works for percent, mg/mL, mol/L, ppm or even proof, as long as the values scale with volume. For mass-based mixing, enter masses instead of volumes with % w/w.

Don’t mix % w/v and % w/w in one blend.

A worked example

A lab combines 200 mL of 40% solution with 300 mL of 10%. Total solute is 40 × 200 + 10 × 300 = 11,000; divided by 500 mL, the blend is 22%. Adding 500 mL of 5% gives 13.5%. Mixing 1 L each of 95% and 70% ethanol gives about 82.5% by volume, though real alcohol–water mixtures shrink slightly.

Measure the final volume for alcohol and strong acids.

Limits

Volumes are assumed to add up. That is close for dilute water solutions but not exact for alcohol and water, concentrated acids, or sugar syrups. For precise work, mix by mass and use % w/w. To find how much of each solution to use for a target, use the Solution Mixing Calculator.

Check results against your lab’s procedures and product data sheets.

Related tools

To hit a target strength, use the Solution Mixing Calculator. For a single dilution, use the C1V1 Dilution Calculator.

  • C = Σ(CV) ÷ ΣV
  • Water counts as 0
  • Keep units consistent

Further reading: Weighted averages. It explains the format behind this blend concentration calculator in more detail.

Where it helps

Labs

Combining leftover stocks.

Brewing and distilling

Blending batches.

Pharmacy

Mixing strengths.

Agriculture

Combining tank mixes.

Quick fixes

“Enter both … solution 3”

Fill both boxes or leave both blank.

“…total volume must be more than 0”

Enter at least one volume.

Result looks off

Check all values use the same units.

Alcohol blend volume low

Mixtures shrink; measure the final volume.

Frequently asked questions

How do I calculate a blend concentration?

Σ(C × V) ÷ total volume.

What is 200 mL 40% + 300 mL 10%?

22%.

Can I blend three solutions?

Yes.

Does water count?

Yes, with concentration 0.

What units can I use?

Any, if consistent.

Is it a weighted average?

Yes, by volume.

Do volumes add up exactly?

Nearly, except alcohol and strong acids.

How do I hit a target?

Use the Solution Mixing Calculator.

Is my data saved?

No.

Is it free?

Yes.