Mixing to a target concentration
This short guide explains what the solution mixing calculator does, how to get the best result and when another tool is a better fit.
The Pearson square
The Pearson square, also called alligation, is a quick way to find how much of two solutions to mix. Write the target in the middle, the strong and weak solutions on the left, and subtract diagonally: target minus weak gives the parts of strong, strong minus target gives the parts of weak. The calculator does the same and scales it to your total volume.
It’s used in pharmacy, feed formulation and winemaking.
The rule
The target must lie between the two starting strengths, because mixing can only land between them. If you need something stronger than your strongest solution, you must add pure substance or evaporate instead. The calculator warns you when the target is out of range.
Water is a weak solution with concentration 0.
A worked example
A pharmacy needs 500 mL of 40% from 70% and 10% stocks. Parts of strong = 40 − 10 = 30, parts of weak = 70 − 40 = 30, so equal volumes: 250 mL each. To make 1 L of 70% ethanol from 95% and water: 70 parts of 95% and 25 parts water, giving 736.8 mL of 95% topped up with 263.2 mL water.
For ethanol, top up to volume because mixtures shrink.
Limits
The method assumes concentrations combine linearly by volume. For alcohol, sugar and strong acids, mix by mass using % w/w for best accuracy. Check the result with a hydrometer, refractometer or meter when it matters.
Check results against your lab’s procedures and product data sheets.
Related tools
To find the result of a mix, use the Blend Concentration Calculator. For one stock and water, use the C1V1 Dilution Calculator.
- V₁ = V(T − C₂) ÷ (C₁ − C₂)
- Target must be between the two
- Use 0 for water
Further reading: Alligation method. It explains the format behind this solution mixing calculator in more detail.
