Getting C1V1 dilutions right
This short guide explains what the c1v1 dilution calculator does, how to get the best result and when another tool is a better fit.
What C1V1 = C2V2 Represents
The equation expresses conservation of a solute quantity during a simple dilution when concentration and volume are used on compatible bases. C1 and V1 describe the starting solution used; C2 and V2 describe the final diluted solution. The relationship is widely useful because any one of the four variables can be solved when the other three are known.
Solve for V1
The most common laboratory use is V1 = C2V2 รท C1, which gives the stock volume required for a target concentration and final volume. If 100 mM stock is used to prepare 50 mL of 10 mM solution, V1 is 5 mL. The remaining final volume is established according to the preparation method.
Solve for C2
If a known volume of stock is diluted to a known final volume, C2 = C1V1 รท V2. For example, 5 mL of 100 mM stock brought to 50 mL final volume gives 10 mM. This calculation is useful for checking what concentration results from an actual transfer.
Solve for V2
If the stock amount and target concentration are fixed, V2 = C1V1 รท C2 gives the final volume compatible with the ideal dilution relationship. The target must be lower than the starting concentration for simple solvent dilution when V2 should exceed V1.
Solve for C1
If a preparation record provides V1, C2, and V2, the implied stock concentration is C1 = C2V2 รท V1. This can be a useful worksheet check, but it does not independently measure or verify the actual stock concentration.
Concentration Units Must Match
C1 and C2 must be on the same basis. M and mM can be used after conversion; mg/mL should not be mixed with mol/L unless molecular-weight conversion is performed. Percentages must use a compatible basis such as both w/v or both v/v.
Volume Units Must Match
V1 and V2 must be in compatible units. If one is mL and the other is ยตL, convert before calculation. The same unit does not need to be liters specifically; the equation relies on the ratio when both volumes use the same scale.
When C1V1 Is Not Enough
The equation does not model chemical reaction, precipitation, changing solute amount, non-additive final volumes, density-based conversions, or product-specific reconstitution. If the process changes the amount of substance or uses a different concentration definition, a different model is needed.
Further reading: The dilution equation explained. It explains the format behind this c1v1 dilution calculator in more detail.
