What specific gravity tells you
This short guide explains what the specific gravity calculator does, how to get the best result and when another tool is a better fit.
A simple ratio
Specific gravity (SG), also called relative density, is a liquid’s density divided by the density of water. Because it is a ratio, it has no units: a liquid with SG 1.2 is 20% denser than water whatever units you measured in. That makes SG easy to compare between labs and countries. The reference water should be at the same temperature as your sample, since density changes with temperature.
Many hydrometers are calibrated for 20 °C or 60 °F.
Brewing, oils and acids
Different industries use SG in their own way. Brewers talk in gravity points: an SG of 1.050 is 50 points, and the drop during fermentation shows how much sugar became alcohol. The oil industry uses API gravity, where higher numbers mean lighter oil; anything above 10° floats on water. Chemical suppliers sometimes use Baumé degrees for acids and syrups. The calculator shows the scale that suits your result.
Formulas: API = 141.5 ÷ SG − 131.5; Baumé (heavy) = 145 − 145 ÷ SG.
A worked example
A home brewer measures wort at 1.080 g/mL at 20 °C, where water is 0.9982 g/mL. SG = 1.080 ÷ 0.9982 = 1.0819, or 81.9 gravity points. After fermentation, a reading of 1.012 would suggest roughly (1.082 − 1.012) × 131.25 ≈ 9.2% alcohol using the common brewing rule. An oil sample at 0.85 g/mL gives SG 0.8515, or about 34.7° API, a medium-light crude.
Correct hydrometer readings for temperature if your sample isn’t at the calibration temperature.
Measuring density
A hydrometer floats in the liquid and is read where the surface crosses the scale. A digital density meter is faster and more precise. For small samples, weigh a known volume in a pycnometer or volumetric flask: density = mass ÷ volume. Remove bubbles, which make a liquid seem lighter.
Check results against your lab’s procedures and product data sheets.
Related tools
For sugar content, use the Brix to Specific Gravity Calculator. For alcohol strength, try the ABV Calculator.
- SG = sample density ÷ water density
- No units; compare at the same temperature
- Below 1 floats, above 1 sinks
Further reading: Relative density explained. It explains the format behind this specific gravity calculator in more detail.
