FREE TOOLS. ZERO LIMITS.
No Signup RequiredNo Watermarks
ToolzNova ยท Lab & chemistry calculators

Molarity Dilution Calculator Online

Dilute a molar stock to a target molarity. Enter the starting molarity, the target and the final volume to get how much stock to measure.

Molarity Dilution Calculator

Free molarity dilution calculator that runs in your browser. Nothing is uploaded.

M1V1 = M2V2
Calculator inputs
โ€”
Stock volume neededโ€”
Approx. diluentโ€”
Dilution factorโ€”
Final volumeโ€”
โœ“ Free   โ€ข   โœ“ No signup   โ€ข   โœ“ Mobile friendly

Use reliable source values and follow the method, label, standard, or professional procedure that governs your task.

For acids, always add the acid slowly to the water, never water to concentrated acid.

How to dilute to a target molarity

1Enter starting molarity

The stock concentration in mol/L.

2Enter target and final volume

The molarity and volume you need.

3Prepare safely

Measure the stock and add it to most of the water, then top up to the mark.

Diluting common molar stocks

M1 ร— V1 = M2 ร— V2, so stock volume = M2 ร— V2 รท M1.

Concentrated acid values use typical label molarities.

StockTargetFinal volumeStock volume
12.1 M HCl1 M500 mL41.3 mL
18.4 M Hโ‚‚SOโ‚„0.5 M1 L27.2 mL
5 M NaCl0.15 M200 mL6 mL
1 M Tris50 mM100 mL5 mL

Molar dilutions done safely

This short guide explains what the molarity dilution calculator does, how to get the best result and when another tool is a better fit.

When C1V1 Is Appropriate

The C1V1 = C2V2 relationship is appropriate when the amount of solute is conserved during a dilution and the concentration units on both sides describe the same basis. It is widely used to prepare a lower concentration from a stock solution. The Molarity Dilution Calculator solves the stock volume needed when starting molarity, target molarity, and final volume are known. It does not model chemical reaction, decomposition, precipitation, or non-ideal behavior that changes the amount of dissolved solute.

Molarity Dilution Calculator โ€“ 12 M to 1 M
How the molarity dilution calculator works: 12 M in, 1 M out.

Keep Molarity Units Compatible

Starting and target concentrations must use the same molar unit before they are compared. A stock of 10 mM and a target of 100 ยตM are not numerically comparable until one is converted. Ten millimolar equals 10,000 micromolar, so the dilution is one hundredfold. Use the Nanomolar Calculator or Molar to Millimolar Calculator when a separate unit conversion helps make the scale clear before applying the dilution equation.

Final Volume Means Final Solution Volume

V2 is the final total solution volume, not simply the amount of solvent added. If the calculator reports that 2 mL of stock is required for a final volume of 20 mL, the theoretical diluent amount is about 18 mL for an additive-volume preparation. Precise volumetric methods often transfer the stock and then bring the mixture to a final calibration mark rather than measuring an exact solvent volume separately.

The Target Must Be Lower for Simple Dilution

A simple solvent dilution cannot create a concentration higher than the starting stock. If the target molarity exceeds the stock molarity, the required stock volume would exceed the requested final volume. In that situation a more concentrated stock, evaporation, or another preparation method is needed. The calculator checks this relationship so an impossible simple-dilution plan is easier to notice.

Worked Molarity Dilution Example

To prepare 100 mL of 0.20 M solution from a 1.00 M stock, V1 = 0.20 ร— 100 รท 1.00 = 20 mL. The remaining theoretical volume is 80 mL of diluent before considering the preparation method. If the same problem is expressed as 200 mM from 1,000 mM, the numerical result is identical because the concentration units are consistent on both sides.

Volumetric Accuracy and Glassware

The appropriate preparation equipment depends on the precision required. Graduated cylinders, serological pipettes, volumetric pipettes, and volumetric flasks have different tolerances and intended uses. The Molarity Dilution Calculator provides arithmetic but does not determine whether selected glassware is adequate. For quantitative analytical work, follow the relevant method and use calibrated or specified equipment.

Stock Concentration Quality

A dilution cannot be more accurate than the starting stock concentration. If a stock was prepared by weighing an impure reagent, has degraded, evaporated, absorbed moisture, or was assigned a concentration only approximately, the final calculated molarity inherits that uncertainty. Record stock identity, preparation date, concentration basis, and any standardization or assay value required by the method.

Multiple-Step Dilutions

A very large dilution may call for an impractically small stock volume. In that case, an intermediate stock or serial dilution can keep each pipetted volume in a practical range. Use the Serial Dilution Calculator to plan the stages and the Molarity Dilution Calculator to verify individual concentration-volume steps. Document each intermediate concentration so the overall factor can be reconstructed.

Further reading: The dilution equation explained. It explains the format behind this molarity dilution calculator in more detail.

Where itโ€™s used

Acid prep

Dilute concentrated acids.

Buffers

Working molarities from stocks.

Salt solutions

NaCl and KCl working strengths.

Coursework

Check M1V1 problems.

Quick fixes

Mixed M and mM

Convert so both molarities use the same unit; 50 mM = 0.05 M.

Target above stock

Dilution can only lower molarity.

Solution got hot

Diluting strong acids releases heat; add acid slowly to water and let it cool before topping up.

Volume off after mixing

Top up to the final volume in a volumetric flask after cooling.

Frequently asked questions

What is the formula?

M1V1 = M2V2.

How much 12 M HCl for 500 mL of 1 M?

About 41.3 mL.

Do I add acid to water?

Yes, always acid to water.

Can I mix M and mM?

Convert to the same unit first.

How much water do I add?

Top up to the final volume after adding stock.

Why does the solution get warm?

Strong acids release heat when diluted.

Is my data uploaded?

No. The molarity dilution calculator works entirely in your browser, so your file stays on your device.

Can I use it for bases?

Yes; add concentrated base to water slowly.

What if I only know %?

Use Percent to Molarity first.

Is this the same as C1V1?

Yes, with molar units.