Spike Recovery Calculator Calculate analytical spike recovery from an unspiked result, a spiked result, and the known concentration contribution of the spike.
toolznova.com • Laboratory Calculator
Use values from the validated analytical, laboratory, or formulation method that governs the task.
Enter reliable source values, calculate, and review units and assumptions before using the result.
Use values from the correct method, standard, sample, stock, or formulation record.
The calculator applies the formula shown openly on this page.
Check units, magnitude, assumptions, and method requirements before use.
Transparent formulas, contextual links, and a responsive layout make the arithmetic easier to audit.
Calculate without rebuilding the equation in a spreadsheet.
Review the exact relationship used.
Works cleanly on phones and desktop.
Move to the next relevant laboratory calculation.
Method-specific assumptions are kept visible.
Use the calculator directly.
The Spike Recovery Calculator is a transparent arithmetic aid rather than a substitute for a laboratory method. Use the equation below together with the detailed examples and checks.
Spike recovery compares the measured increase after adding a known analyte amount with the increase theoretically expected from that spike. It is often used to evaluate matrix effects, preparation loss, or method performance.
Recovery % = (spiked result − unspiked result) / spike added × 100. All three concentration terms must use the same analyte basis and compatible units.
An unspiked sample measures 40 units, the spiked sample measures 58 units, and the spike contribution is 20 units. Recovery = (58 − 40)/20 × 100 = 90%.
The unspiked result represents analyte already present in the sample. Subtracting it isolates the measured increase attributed to the added spike.
The spike contribution should be expressed in the same final-sample concentration basis as the measured results. If adding spike changes sample volume materially, the method may require a volume correction.
If the reported spiked and unspiked results have already been corrected for dilution, do not multiply them by the dilution factor again. A common QC error is applying the same correction twice.
A recovery of 90%, 100%, or 110% cannot be judged without the applicable method and concentration level. Different analytes, matrices, methods, and regulatory contexts can have different acceptance windows.
The Recovery Percentage Calculator handles the simpler measured-versus-expected ratio when there is no separate unspiked baseline subtraction.
Low or high recovery can reflect matrix suppression or enhancement, extraction loss, calibration mismatch, preparation error, instability, contamination, or random measurement variation. The calculator reports the percentage but does not diagnose the cause.
Record sample identity, original result, spike source, spike amount, final concentration contribution, spiked result, dilution corrections, and acceptance criterion from the method.
Before pressing Calculate, identify what each number represents physically. A concentration, total amount, aliquot volume, final volume, expected value, and measured value are not interchangeable. Many spreadsheet errors begin when a correct number is copied into a field with a different meaning.
Compatible units are essential. If two concentrations are compared, convert them to the same basis first. If two volumes are used in a ratio, use the same volume unit. The formula may look dimensionless only because matching units cancel.
Estimate the expected answer before relying on the displayed decimals. A tenfold dilution should reduce concentration by about tenfold, a weighted average should remain between its inputs, and a recovery result near the expected value should be near 100%.
Where possible, plug the output back into the defining equation. A stock aliquot should reproduce the target concentration, a recovery percentage should reconstruct the measured value, and a weighted concentration should reproduce the total contribution.
Keep full precision during intermediate arithmetic. Round only the final value according to the measurement quality and reporting method. A calculator can display many digits, but that does not make the source data more precise.
These calculators produce theoretical arithmetic outputs. Actual laboratory results may differ because of transfer error, volumetric tolerance, purity, recovery, matrix effects, non-additive volumes, reaction, instrument bias, or other method-specific factors.
Related ToolzNova links are placed where another calculation genuinely follows from the current workflow. Standard preparation connects to calibration, spike recovery connects to general recovery, and solution mixing connects to final concentration and dilution.
If the calculation is copied into a spreadsheet, preserve raw inputs in separate columns and put formulas in new columns rather than overwriting source values. This creates a visible audit trail and helps prevent duplicate unit conversions.
Recalculate from the original inputs whenever stock concentration, target concentration, standard assignment, spike level, volume, or other source data change. Manually adjusting an old result can preserve hidden assumptions from a previous preparation.
Record the formula, units, source values, calculation date, method reference, and assumptions such as additive volume or nonreactive mixing. These notes often matter more for reproducibility than the final number itself.
The Spike Recovery Calculator result should be read with its unit, basis, and source assumptions. A bare number can be mistaken for a different concentration, amount, or percentage when copied into another worksheet. Preserve the input labels next to the output so later users can reconstruct what was calculated.
Use a second route to verify the Spike Recovery Calculator when possible. Recalculate a contribution from concentration and volume, reverse a dilution, or reconstruct a percentage from its numerator and denominator. Agreement from two directions is more informative than simply pressing Calculate twice.
The Spike Recovery Calculator can return a highly precise number even when the available pipette, flask, balance, or instrument cannot support that precision. Compare the calculated quantity with the resolution and uncertainty required by the method before deciding how many digits to report or how a preparation should be scaled.
When using the Spike Recovery Calculator in a longer calculation chain, make unit conversions explicit. Do not let a spreadsheet silently change µg/mL to mg/L or mL to L inside a long formula. A separate conversion step makes a thousandfold error much easier to find.
The Spike Recovery Calculator assumes the user supplied the correct source values. A wrong stock assignment, outdated certificate, duplicated dilution correction, mislabeled sample, or incompatible concentration basis can produce a polished but wrong answer. Verify the source before questioning the algebra.
Before saving a Spike Recovery Calculator result, record the inputs, units, formula, method or source, date, and any assumption that materially affects the result. If the calculation is repeated later, start from those source values rather than adjusting the previous answer manually.
When the spike itself contributes noticeable volume, the method may define recovery on a final-volume basis or require a dilution correction. Do not invent that correction; use the exact calculation convention specified by the analytical procedure.
When the spike itself contributes noticeable volume, the method may define recovery on a final-volume basis or require a dilution correction. Do not invent that correction; use the exact calculation convention specified by the analytical procedure. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid.
When the spike itself contributes noticeable volume, the method may define recovery on a final-volume basis or require a dilution correction. Do not invent that correction; use the exact calculation convention specified by the analytical procedure. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid.
When the spike itself contributes noticeable volume, the method may define recovery on a final-volume basis or require a dilution correction. Do not invent that correction; use the exact calculation convention specified by the analytical procedure. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid.
When the spike itself contributes noticeable volume, the method may define recovery on a final-volume basis or require a dilution correction. Do not invent that correction; use the exact calculation convention specified by the analytical procedure. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid.
When the spike itself contributes noticeable volume, the method may define recovery on a final-volume basis or require a dilution correction. Do not invent that correction; use the exact calculation convention specified by the analytical procedure. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid.
When the spike itself contributes noticeable volume, the method may define recovery on a final-volume basis or require a dilution correction. Do not invent that correction; use the exact calculation convention specified by the analytical procedure. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid. Recheck the original source values whenever the preparation, sample, standard, or stock changes; do not assume an earlier calculation remains valid.
These internal links follow the natural calculation workflow.
The unspiked result is subtracted from the spiked result.
No.
Yes mathematically.
Yes.
No. It provides arithmetic only.
Yes, always keep the concentration and volume basis explicit.
No. Keep precision until final reporting.
Yes. Reverse calculations are a useful independent check.