Converting percent concentration step by step
This short guide explains what the percent to molarity calculator does, how to get the best result and when another tool is a better fit.
Why Percent Needs a Defined Basis
A percent concentration can mean weight/volume, weight/weight, volume/volume, or another convention. Molarity is moles per liter, so the route from percent to molarity depends on what the percent actually represents.
% w/v to Molarity
For % w/v, x% means x grams per 100 mL final solution. Multiply by 10 to obtain g/L, then divide by molar mass to obtain mol/L. Formula: M = (% w/v ร 10) รท molar mass.
Worked % w/v Example
A 5% w/v solution of a 100 g/mol compound contains 50 g/L. Dividing by 100 g/mol gives 0.50 M.
% w/w Requires Density
For % w/w, x% means x grams solute per 100 grams solution. To convert to grams per liter, solution density is required. For density d in g/mL, g/L solute = (%/100) ร d ร 1000.
Worked % w/w Example
A 10% w/w solution with density 1.20 g/mL contains 120 g solute per liter of solution. If molar mass is 60 g/mol, molarity is 120/60 = 2.0 M.
% v/v Cannot Usually Convert With Molar Mass Alone
Volume percent gives component liquid volume per final volume. Converting it to molarity usually requires density and chemical composition of the component, not only molar mass. This calculator therefore focuses on w/v and w/w modes.
Percent Concentration Tool
The Percent Concentration Calculator can help distinguish w/v, w/w, and v/v definitions before attempting a molarity conversion.
Molar Mass Still Matters
Both supported modes ultimately convert to grams per liter and then divide by g/mol. Use the Molecular Weight Calculator for the exact solute form.
Density Must Match the Solution
For w/w conversion, density should correspond to the actual solution composition and relevant temperature. Water density should not be assumed for concentrated solutions unless the method explicitly permits an approximation.
Check the Reverse Conversion
After calculating M, multiply by molar mass to recover g/L. For w/v, divide g/L by 10 to recover the starting percentage. For w/w, use density to reconstruct the mass fraction.
Further reading: Molar concentration explained. It explains the format behind this percent to molarity calculator in more detail.
